Top 8 Best SUP Electric Pumps For Inflatable Paddle Boards Reviewed

If you want to settle for nothing but the best, then opting for the Bravo pump can be a good choice. Almost all the products manufactured by this brand, speak of quality and are also offer excellent customer service. The Bravo 20 SUP Electric Pump serves as both a stylish and productive pump. So, it’s a good choice!

Compatibility:
A commendable feature of the Bravo 20 SUP Electric Pump is the range of adaptors that come with its hose. The hose itself is super durable as well. With the pump, you also get the adapters that work well with various valves, including screw valves (Boston), 9mm inflate valves (kite), H3 SUP valves, etc.

So far we have tried the Bravo Pump with, a Nixy Venice, and an Atoll paddle board too. The pump can be used with boards even if the plastic depth ring has been removed.

3-depth rings are included with the electric pump. These are yellow, green, and black. These depth rings can be adjusted and used to alter the depth of the valve as desired.

A great thing about this pump is the fact that it is compatible with all types of inflatable objects, and its use is not limited to inflatable paddleboards.

This is a source of saving money as one does not need to invest in several electric pumps. The Bravo 20 electric pump is the only pump you’ll need.

Functions:
This electric pump is a lot quieter compared to the other boards. People often think that a pump with less noise would perform slow, but that is not the case with this one. This pump can quickly inflate most boards in a short span of time (5 minutes).

The time it takes to inflate one board is merely five minutes and it can go up as high as 15 PSI. A pressure indicator dial is also available on the pump so that one can set pressure accordingly.

Automation:
A commendable feature of the pump is that it comes with a pressure indicator dial that can be used to select the pressure. The users can simply select the pressure and leave the pump to do the rest. It has an automatic shut off function that turns off the pump as soon as the selected PSI level has been achieved. This feature of the pump eliminates the risk of overinflation or damaging the board.

This function also saves time as one does not have to monitor the pump while inflating the board. The board can be attached to the pump, and the user can walk away which allows them to get ready or do something else.

Most of the electric pumps are prone to overheating. If overheated, the pump can incur irreversible damage. To prevent this from happening, the pump also comes with a shutoff feature. It is a thermal automatic function that turns the pump off in case it starts to overheat.

Power:
The pump can be used with a 12 volt battery (DC). The battery included with the pump is rechargeable and can be recharged with any 110-240 AC/DC power. Moreover, you can also use it with a cigarette plug.

However, it is to be noted that the cigarette plug is only for charging the pump. You cannot use it while it is plugged into the cigarette plug. Alligator clips are included to connect the pump with an external 12-volt battery which is a huge advantage over other electric pumps.

Make sure you charge the pump for 10-12 hours before taking it out, then all you have to is inflate your board at your favorite spot, there is no need to carry the charger with you.

Characteristics:
Functions with 110 volts, 12 volts, and rechargeable batteries of 12 volts.
The hose works with a number of nozzles.
Allows both inflation and def.
Automatic thermal power off feature.
Overall rating is 4.6 out of 5.0.

(paid link)

This is a great pump for many reasons. It comes with many commendable features and is known for its reliability.

Compatibility:
With this electric Pump, you get an H3 nozzle and a hose that does not kink. This hose and nozzle can be used to connect the pump to all Tower paddle boards. Some other boards are also compatible with this valve.

Functions:
This pump is the one to choose if you want to inflate your boards quickly. The pump can work to attain 20 PSI and inflate a board to the full capacity within a few minutes. However, it is to be noted that the pump is a bit noisy.

Automation:
There’s an automatic turn off the feature in this pump that comes in real handy. PSI limit can be adjusted then just attach the pump to the board and let it do its work. As soon as the entered limit is reached, the pump shuts off automatically.

Strength:
This pump can be connected to a cigarette plug or a vehicle battery of 12v. This is an added advantage as one can use this pump with both a battery as well as a cigarette lighter.

Characteristics:
It can be used with both batteries or a cigarette lighter.
It comes with an H3 hose.
It can be used to inflate as well as deflate boards.
Overall rating is 4.5 stars out of 5.0.

(paid link)

Seamax SUP Intelligent Double Stage Electric Pump is another pump that will work for both inflating and deflating boards. It is power efficient and can be used to inflate boards in two different stages.

Compatibility:
This Electric Pump works flawlessly with Bravo, Naru, Halkey Roberts, and any air valve that is similar to these valves. It is recommended that you use a suitable O-ring to ensure a tight connection between the board and the pump.

Functions:
The pump operates in two cycles. The initial stage involves the board inflating at 350 I/min speed, whereas, in the latter stage, it operates at a rate of 70 I/min. A maximum PSI level of 20 can be achieved with this pump.

Automation:
This board is also automated. You will find it a breeze to attain the required pressure thanks to the LED display (backlit), and as soon as the selected pressure is attained, the pump turns off automatically.

Power:
With this double pump, you can make a connection with a battery of 12 volts (DC) or a cigarette lighter as desired. The cigarette plug connector includes a 12A connector.

Characteristics:
It can be used for both inflation and deflation of the boards.
Board has an O-ring with 0.3mm thickness.
It has a 9′ long power cord as well (DC).
The weight of the pump is 3.6 pounds.
Overall rating is 4.0 out of 5.0.

(paid link)

The Airhead SUP Velocity Pump is a must-have if you have a Airhead paddle board or not. It is a renowned electric pump that is commended for its amazing features and efficient performance. In short, this pump fits the bill when we speak of a powerful SUP pump.

Compatibility:
The Airhead ISUP Velocity Pump can be used with all variants of Airhead paddle boards on the market as well as Boston Valves and H-valves.

Functions:
This pump is known for its excellent speed as it is known to inflate paddle boards 33% faster than other electric pumps. It has a single-stage operation with high-pressure inflation.

Automation:
The Airhead SUP Velocity Pump is fully automated. All the users have to do is plug the pump to the board and go about their business. The pump has the ability to automatically turn off when the board is inflated to the desired PSI level.

Power:
This pump works with a 12 volt battery. It can be connected to a car battery as well. The pump has a large capacity to pump even the largest boards, that usually require 20 PSI which this pump can handle with ease.

Characteristics:
Inflation takes place on a single stage.
Cable for battery connections is included.
It comes with Alligator clips.
Automatic shut off feature.
It comes with a mesh bag for storage.
Overall rating is 3.2 out of 5.0.

The Sevylor and Water Sport Pump can be used to inflate beds, paddleboards, boats, and anything else that you wish to inflate. It is effortless and simple to use.

Compatibility:
Like the other electric pumps included in this list, the Sevylor SUP pump also comes with adaptors that make it possible to use this pump with several boards.

Functions:
The pump operates at 15 PSI and is a perfect choice for inflating paddle boards. The pump offers high pressure, which makes inflating boards convenient and straightforward.

Automation:
This board comes with an easy to read display that can be used to select the pressure limit of your choosing. Once you are done choosing the pressure limit, connect it to the board and switch it ON. The pump has the capability of turning off automatically once the PSI level has been achieved.

Power:
A DC battery of 12v is required to operate this SUP and Water Sport Pump.

Characteristics:
Easier to carry around since it’s only 3.4 pounds in weight.
It comes with an extension hose as well as a valve capable of controlling extreme pressure.
It has an automatic switch-off feature.
The overall rating is 3.6 out of 5.0.

(paid link)

This is a Two-Stage Electric Turbo Pump and is considered a favorite amongst many SUPers. Its manufacturers kept every detail and requirement of a good pump in mind while manufacturing it. It will cut down the inflation time, so your board can be inflated in less time.

Compatibility:
The Bravo BTP Mano Two-Stage Electric Turbo Pump comes with a valve that is compatible with a majority of the boards. But several attachment options are also available to ensure that it can be used with all types of boards.

Functions:
As indicated by the name, the pump functions in two different stages. First, it operates on low pressure and high volume mode that helps the board acquire shape. Next, the stage switches to the pressure intensive mode and inflates the board to its full capacity. Its inflation level is 15 PSI.

Automation:
The Bravo BTP Mano Two-Stage automatic pump will turn off automatically once the selected PSI level is reached and the board is inflated.

Power:
The pump can include a 12-volt battery if ordered. It can also be connected to a car battery. However, it does not come with a power cord for a 120volt outlet. Still, that’s not a problem because beaches rarely have direct power plug facilities.

Characteristics:
An absorption rate of 20 Amperes.
It cannot be connected via a cigarette outlet.
Pump weight is 5.9 lbs.
The overall rating is 4.0 out of 5.0.

(paid link)

As the name indicates, the Bravo BP12 Electric Pump works on a single cycle mechanism as well. It is known for its excellent accuracy and performance that inflates paddle boards within no time. The turbopump will make sure that your board is inflated and ready to go within no time.

Compatibility:
This one is an all-rounder. If you have this pump, there is no need to buy any other pump. This pump comes with a universal valve adapter that is compatible with all types of SUP boards.

Functions:
This electric pump offers a PSI range of 1 and 14.5. This is a single-stage electric pump, which makes it far more efficient than the two-stage pumps. Another great thing about this pump is the fact that it is not very noisy. However, it is to be noted that this pump is merely used to inflate the boards and cannot deflate them.

Automation:
This board is automated, and users can be worry-free as they can limit the PSI as they desire.

Power:
The pump works with a 12V battery. However, you have to buy it separately. It can also be used with a car battery, but a cigarette plug won’t work with it.

Characteristics:
Its weight is only 2.6 pounds. Hence, you can move it easily.
It comes with several accessories such as an inflation hose, valve adaptors, and Alligator clips.
The inflation range is between 1 and up to 14.5 PSI.
Overall rating is 4.0 out of 5.0.

When searching for a pump that is quick, durable, and lightweight, there is no better option other than this pump. It is made of top-notch material that is mostly used for making marine accessories, which adds to its durability and makes it perfect for regular use.

Compatibility:
This SUP Pump has excellent compatibility with the Halkey-Roberts, Bravo, and all other air valves that have a similar design to these valves. Hence, it can work with plenty of boards that are available.

Functions:
The pump combines speed and optimal performance. It can inflate a board within fifteen minutes and can reach 20 PSI as well. The pump is a single-stage pump. This might seem like a downside to some, but in reality, this is the reason why it can inflate a board so quickly.

Automation:
This board comes with an LCD screen. The users can use it to select the desired PSI level. After the level has been selected and the pump has been attached to the board, simply switch it ON and let it do its job. Once the required pressure is attained, the device will automatically turn off.

Power:
It can easily be connected with a 12 Volts battery or a vehicle battery.

Characteristics:
The length of the DC cord is 9 feet.
HR value adapters are included with the board.
It comes with O-rings having 0.3mm thickness, as well as 0.5mm and 0.6mm.
The pump works within a voltage range of 11-14 Volts DC.
Easier to move around thanks to the less weight (2.86 pounds).
It comes with a 3.5′ air hose.
Overall rating is 3.5 out of 5.0.